Commell FS-97E Instrukcja Użytkownika Pobierz pdf (Strona 24)

FS-97E User’s Manual

23-

To setup the LCD, you need the component below:

1. A panel with LVDS interfaces.

2. An inverter for panel’s backlight power.

3. A LCD cable and an inverter cable.

For the cables, please follow the pin assignment of the connector to make a cable,

because every panel has its own pin assignment, so we do not provide a standard cable;

please find a local cable manufacture to make cables.

LCD Installation Guide:

1. Preparing the FS-97E, LCD panel and the backlight inverter.

2. Please check the datasheet of the panel to see the voltage of the panel, and set

the jumper JVLCD to +12V or +5V or +3.3V.

3. You would need a LVDS type cable.

4. To connect all of the devices well.

For sample illustrator only

Panel side

Board side

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 53 54

Brak uwag

Commell FS-97E Instrukcja Użytkownika Strona 24